+49 7142 993810

DÜRR NDT Security | CR 35 SEC Portable EOD X-Ray Scanner

CR 35 SEC – CR-Scanner

Diagnose threats with precise image quality! Specially developed for mobile IED (Improvised Explosive Device) and EOD (Explosive Ordnance Disposal) applications.



Technology proven in more than 25.000 units



Transport solutions provide superior mobility and fastest on-site deployment



Reduction of moving parts achieves unequalled reliability

CR 35 SEC - Mobility at its highest level

The Imaging Plate Scanner was designed and developed in close collaboration with Security Organizations, to handle plates of maximum 35 cm width and virtually any conceivable length.

The device is constructed in accordance with Security Organization specified components.

Make your diagnosis using proven technology - proved in more than 25,000 devices.

Quality - hand made in Germany

  • Mobility
  • Speed
  • Reliability
Counter IED Operations


  • Intuitive Operation
  • Contrast enhancement
  • Filter functions
  • Measurements
  • Zoom
  • Stitching (join several images for large objects)
  • Archiving
  • Evidence security
  • Catalogue of known components
  • KISS function for ease of use
EOD-Tec Software

Computed Radiography

Computed Radiography (CR) is the production of a digital image by using a Phosphor Imaging Plate (IP) in place of conventional film.

Key advantaged of CR include:
– IP's are re-usable
– No dark room or chemicals required
– Exposure and process times reduced
– Easy work flow and image optimisation with D-Tect software
– Simple to share digital information and archive

The CR technology consists of a 3-step process
The Image (storage) Plate (IP) is exposed with X-ray or Gamma radiation, which causes the IP phosphor layer in the plate to store the X-ray image. During the reading process of the plate in the scanner, a focused laser beam triggers the release of the stored image data in the form of visible light. The emitted light is detected, captured, and converted into electrical signals which are digitized and fi nally displayed as a digital image on the PC monitor. The internal in-line eraser purges the residual data from the IP, which is then ready for the next exposure.

What is important in deciding to use CR?
Especially in the IED / EOD area, with a variety of object, the size of the storage plate, and therefore the available exposure area, is very important. Images must gather all the information in minimal time so that the additional disposal steps can be executed as fast as possible. Mobility and portability are important.

Rapid deployment to the site, with consideration and awareness of the surroundings and its terrain is critical for a successful mission.

Ultimately, the specific situation the bomb squad finds itself in, must be considered. The software must be simple, and has to produce a reliable result on which security based decisions can be made in shortest time.

Why CR-Technology from DÜRR NDT
DÜRR NDT is committed to deliver products perfectly tailored to meet the needs of the market.

Through the continuous optimisation of existing products and development of new solutions, DÜRR NDT has rapidly become one of the market leaders in non- destructive testing.


After positioning the imaging plate or Quad Plate (for large objects), the object is exposed using a portable X-ray source.



After the exposure, the Bomb technician insert the exposed plate(s) into the scanner and automatically image will appear on the monitor.

Imaging plate scanning


Analysis of the image using software and embedded aids, such as filters, measurement tools, etc.

Image diagnosis
Technical data CR 35 SEC
Pixel size
50 - 200 µm
(Basic Spatial Resolution)
100 µm
Grey levels 16 bit, 65.536 grey levels
(H x W x D)
40 x 37 x 47 cm
15.8" x 14.6" x 18.5"
Weight 17,5 kg
38.6 lbs
Max. Plate size 35 cm wide
length virtually unlimited
Electrical 100 – 240 VAC / 50 – 60 Hz
< 140 W
Temperature range 10 to 35 °C
50 to 95 °F
Noise Level < 39 dB(A)
Laser Class I (EN 60825-1: 1994-03
+ A1: 2002-07 + A2: 2001-03)
+ CFR 1040.10
PC-Connection Ethernet
(TCP-IP protocol)
Display 4.3“ TFT, 800 x 480 px
Storage SDHC, max 32 GB
Software DÜRR NDT D-Tect
IT-Requirements Download


Imaging Plates

Imaging Plates

IPs are available in different resolutions and all standard formats and, on request, in special sizes and custom shapes.

Transport Case
Transport Case

Transport Case

Weighing just 17,5 kg (38.6 lbs), the HD-CR/CR 35 is the lightest full-format scanner available. When in its flight case, the total weight is just under 27,5 kg (60.7 lbs)!

Quad Plate

Quad Plate

Foldable fleece-wall, allowing to attach several IPs in order to inspect bigger objects.



Scanna MSC Ltd

223 Regent Street
London W1B 2EB

Contact Noel Cummings
Phone +44 20 7355 3555
Mobile +44 7887 680 447
Fax +44 20 7355 3556
Email noelc@scanna-msc.com
Web www.scanna-msc.com


VisiConsult GmbH

Brandenbrooker Weg 2-4
D-23617 Stockelsdorf

Contact Frank Sobieski
Phone +49 45139689240
Mobile +49 1773808069
Fax +49 4514992796
Email f.sobieski@visiconsult.de
Web www.visiconsult.de
© DÜRR NDT GmbH & Co. KG - All rights reserved.